|
|
Engine |
- Model................ Deutz F2L1011F Diesel
|
- Cylinders ................................... 2
|
- Bore/stroke............ 3.58” x 4.13” (91 x 105 mm)
|
- Displacement .................. 83.4 in3 (1.366 L)
|
|
|
- *Gross horsepower per SAE J1995, net horsepower per SAE J1349.
|
|
ELECTRICAL |
|
Alternator ............ 12 volt, 60 amp |
|
Battery ............................ 12 volts / 685 Cold cranking amps |
GROUND DRIVE
|
Hydrostatic ground drive and dual-lever controls for creep and transport enable you to trench or plow to maximum working capacities — forward and reverse speeds are equal.
Heavy-duty 4-wheel drive axles with both front and rear limited-slip differentials provide all the groundbiting action you’ll need for maximum tractive effort, especially in tough plowing conditions.
Hi-flotation 26 x 12 x 12 8-ply bar tread tires, with heavy-duty sidewalls and rim guard, increase traction while operating and minimize landscape restoration by improving flotation in soft terrain.
Neutral position of the hydrostatic drive provides dynamic braking power when the engine is running. An over-center, handoperated emergency/parking brake with disc and caliper on the drive shaft prevents movement on slopes. |
Hydrostatic drive ......................... Variable displacement axial piston pump and fixed displacement piston motor with fixed-ratio gearbox 18 gpm @ 2000 rpm (68.1 L/min)
-
Axle ratio ............................................................ 5.38:1
-
Axle load rating................................. 3,000 lb (1361 kg)
-
Differential (front & rear) ............................... Limited-slip
-
Output torque (maximum)........... 4,300 lb•ft (5762 N•m)
OPERATOR ENVIRONMENT
|
Left and right entry/exit permits unobstructed operator movement. The seat swivels 360° for operating comfort when working with rearmounted attachments. A monostick ground drive lever and extra lever for creep offer precision control for working and transporting. An automatic neutral return activates hydrostatic braking when the operator releases the lever. Single key-start ignition and shutoff allows fast and easy starts and stops. A seat interlock system requires the operator to be seated when starting and operating the unit. |
|
Dimensions / Operating Weight |
-
Overall height base tractor (to top of exhaust) ..................................................... 86.6” (2.20 m)
-
Overall prime mover length .................................................................................. 109.9” (2.79 m)
-
Overall prime mover length w/trencher and backhoe............................................... 204.3” (5.19 m)
-
Overall prime mover length w/trencher and plow................................................... 211.8” (5.38 m)
-
Minimum ground clearance base tractor ............................................................... 10.0” (254 mm)
-
Wheelbase.......................................................................................................................... 55.1” (1.40 m)
-
Center of front wheel to center of trencher headshaft.......................................... 29.2” (742 mm)
-
Height to centerline of trencher headshaft .......................................................... 18.7” (475 mm)
-
Angle of approach with trencher attachment ......................................................................................... 20°
-
Trencher boom angle down from horizontal......................................................................... 65°
-
Trencher boom angle up from horizontal ............................................................................................... 65°
-
Maximum trencher digging depth w/60.0” boom .............................................. 60.0"
-
Trencher height w/48.0” (1219 mm) boom................................................................. 85.5” (2.17 m)
-
Backhoe transport height................................................................................. 77.8” (1.98 m)
-
Backfill blade height ............................................................................................................13.0” (330 mm)
-
Backfill blade lift height.........................................................................................10.0” (254 mm)
-
Backfill blade depth of cut below grade ................................................................... 4.0” (102 mm)
-
Overall width base tractor .................................................................................... 54.0” (1.37 m)
-
Overall width base tractor w/backfill blade ................................................................ 60.0” (1.52 m)
-
Tread width (centerlines) base tractor .................................................................... 42.1” (1.07 m)
-
Turning radius (outside) base tractor .......................................................... Left - 129.0” (3.28 m)
-
Right - 136.0” (3.45 m)
-
Angle of articulation ............................................................................................ Left - 22°
-
Right - 22°
-
Operating weight* ........................................................................................... 3,906 lb (1772 kg)
|
